Installation OPALE Server/en

==Requirements==

This guide explains the installation and update procedures for OPALE Server on an IBM i system. 

As a reminder, it is recommended to also update the other Mapping Suite software components at the same time to prevent errors due to version conflicts.

===System===

Minimum requirements:

*OS/400 V7R1 or higher
*2 Gb of free disk space
*FTP connection

In case of M-Processing Server update:

*Please refer to the [[OPALE:10.0:Migration:Process de migration|Upgrade Process]].

Note: On OS/400 V7R1 and higher, the versions of M-Processing Server older than 7.1 are not compatible.

===Security===

The <code>QSECOFR</code> profile is required to install the software.

==Update or installation procedure==

===Update information===
Please refer to the : [[OPALE:10.0:Migration:Process de migration|Upgrade Process]]
===Preparation===

The software installation program can be downloaded from the Mapping Suite technical server at https://server.mappingsuite.com.

It is called setup_Opale_vXX.X.X.XXXXX.zip.

After downloading and uncompressing, it can safely be renamed to <span style="background-color:rgba(0, 0, 255, 0.2);">MXXXXX.SAVF</span>.

===Installing or updating by FTP===


====Creating the restore SAVF====

Run this command:
 CRTSAVF FILE(QGPL/<span style="background-color:rgba(0, 0, 255, 0.2);">MXXXXX</span>)

====Transferring and creating content from the library====

There are 3 solutions:

*Transferring the file <span style="background-color:rgba(0, 0, 255, 0.2);">MXXXXX.SAVF</span> via FTP to the previously created library. (Recommanded)
*Transferring the file <span style="background-color:rgba(0, 0, 255, 0.2);">MXXXXX.SAVF</span> via SCP to the previously created library.

However, it is also possible to transfer the ZIP archive and afterwards:

*to extract the archive directly from the previously created library.


=====Transferring FTP from the SAVF to the IBM i system=====

Transferring the MXXXXX.SAVF to the created library.

*Under Windows in Start/Programs, choose MS-DOS Command Prompt
*Go to the folder where the file you have just downloaded is saved e.g. CD My documents\Mapping
*Enter ftp "AS400 IP address" (no quotes) e.g. ftp 9.5.5.3
*And then sign in on the IBM i
*Enter '''binary'''
*Enter '''cd qgpl''' (or the library of the savf file you have created)
*Enter '''put <span style="background-color:rgba(0, 0, 255, 0.2);">MXXXXX.savf</span>'''
*… (the file is being transferred and then you regain control)
*Enter '''close'''
*Then '''quit'''
*And then '''exit'''


[[File:Cmdftp.PNG|none|700px]]


Then, skip to '''Restoring the SAVF'''.

=====SSH Transfer to the IFS=====
If the IBM has its SSH server configured.

Transfer the SAVF file (or the ZIP file) using the SCP protocol (e.g. using WinSCP) to a folder on the IFS.

 scp <span style="background-color:rgba(0, 0, 255, 0.2);">MXXXXX.SAVF</span> user@as400:/QSYS.LIB/QGPL.LIB

Then, skip to '''Restoring the SAVF'''.


=====Extracting the SAVF from the IFS=====
If the ZIP has been transfered to the AS, the <code>jar</code> tool allows you to unzip archives, under <code>qsh</code>.

The extracted file should be <span style="background-color:rgba(0, 0, 255, 0.2);">MXXXXX.SAVF</span> :

 jar xf setup_Opale_server_v10.0.2.XXXXX.zip
 cp <span style="background-color:rgba(0, 0, 255, 0.2);">MXXXXX.SAVF</span> /QSYS.LIB/QGPL.LIB/<span style="background-color:rgba(0, 0, 255, 0.2);">MXXXXX</span>.FILE

Then skip to '''Restoring the SAVF'''.

====Restoring the SAVF====

Run this command:
 RSTOBJ OBJ(*ALL) SAVLIB(QTEMP) DEV(*SAVF) SAVF(QGPL/<span style="background-color:rgba(0, 0, 255, 0.2);">MXXXXX</span>)

====Launch the installation script====

Run this command:
 CALL PGM(QTEMP/RUNSETUP)

====Installation steps====

Enter the name of the library you want to install or update.<br />
<u>Caution</u> : Whether this is a new install or an upgrade, do not use a production library. Please refer to the [[OPALE:10.0:Migration:Process de migration|Upgrade process]]

[[File:Install0.PNG|700px|none]]

 
You will need to specify the:

*Sub-system name (the sub-system is created in the library where the product is restored)
*Installation folders
*System LANGID and code page


[[File:Install1.PNG|700px|none|]]


Note: The code page must always be 4 digits. Example 0037 or 0500.

example of a code page: <br />
0297: French without the euro € symbol<br />
1147: French with the Euro € symbol <br />

After that if you are installing the product, you will need to [[OPALE:10.0:Saisie_de_la_clef_logicielle|enter the software activation codes called software keys]]. If you skip this step, you can do it later by running the '''MAPKEY''' command. See Software Activation. If you are updating the product or do not have the software activation keys now, press <kbd>F3</kbd> to skip.


[[File:Activ1-2.PNG|700px|none]]


Installation is complete when the following screen is displayed. Press  <kbd>Enter</kbd> to continue.
 

[[File:Install param env.PNG|700px|none]]


Note: After installing and before using the product, you will need to end the session and sign back in.

===Language===
====Selecting the language in the mapping menu====

The screens of the Mapping menu can be displayed in the following languages:

*French: MAPMSGFRA
*English: MAPMSGENU
*Japanese: MAPMSGJPN

The language is specified in the environment settings (Language File + Language ID). 

Mapping Menu (enter the command <code>GO MAPPING</code>), option <kbd>14</kbd> then option <kbd>1</kbd>.
or from the general Mapping menu: Operations menu / General Parameters

Otherwise, from the OPALE menu, choose Operations and then "Mapping Environment Parameters"

[[File:Param lang.PNG|600px|none]]
 
[[File:Langopale.PNG|600px|none]]

====Code pages====

=====Supported code pages=====
{| class="wikitable"
!Code
!Codepage
!ISO
!Nom
!Fichier
|-
!AFR
|(037)
|{latin1:1252}
|Afrikaans
|[Q037_19U-Q19U_037]
|-
!BEL
|(1025,1154)
|{Russian:1251}
|Byelorussian
|[Q1154_9R-Q9R-1154]
|-
!BGR
|(1025,1154)
|{Russian:1251}
|Bulgarian
|[Q1154_9R-Q9R-1154]
|-
!CSY
|(0870,1153)
|{latin2:1250}
|Czech
|[Q1153_9E-Q9E_1153]
|-
!DES
|(0500)
|{latin1:1252}
|Swiss German
|[Q1141_19U-Q19U_1141]
|-
!DEU
|(0273,1141)
|{latin1:1252}
|German
|[Q1141_19U-Q19U_1141]
|-
!CHS
|{0836}
|{s.chinese:00935}
|Simplified Chinese
|[Q013_19U-Q19U_037- S_Chinese_base1993.tbl]
|-
!CHT
|{0037}
|{t.chinese:00937}
|Traditional Chinese
|[Q013_19U-Q19U_037- T_Chinese_base1999.tbl]
|-
!ELL
|(0875)
|{Greek:1253}
|Greek
|[Q875_9G-Q9G_875]
|-
!ENA
|(037)
|{latin1:1252}
|Australian English
|[Q037_19U-Q19U_037]
|-
!ENG
|(0285,1146)
|{latin1:1252}
|United Kingdom English
|[Q285_19U-Q19U_285]
|-
!ENP
|(037)
|{latin1:1252}
|Uppercase English
|[Q037_19U-Q19U_037]
|-
!ENU
|(037)
|{latin1:1252}
|United States English
|[Q037_19U-Q19U_037]
|-
!ESP
|(0284,1145)
|{latin1:1252}
|Spanish
|[Q1145_19U-Q19U_1145]
|-
!FRA
|(0297,1147)
|{latin1:1252}
|French
|[Q1147_19U-Q19U_1147]
|-
!FRB
|(0500,1148)
|{latin1:1252}
|Belgian French
|[Q1148_19U-Q19U_1148]
|-
!FRC
|(0500)
|{latin1:1252}
|Canadian French
|[Q1148_19U-Q19U_1148]
|-
!FRS
|(0500)
|{latin1:1252}
|Swiss French
|[Q1148_19U-Q19U_1148]
|-
!GAE
|(0285,1146)
|{latin1:1252}
|Irish Gaelic
|[Q285_19U-Q19U_285]
|-
!HRV
|(0870,1153)
|{latin2:1250}
|Croatian
|[Q1153_9E-Q9E_1153]
|-
!HUN
|(0870,1153)
|{latin2:1250}
|Hungarian
|[Q1153_9E-Q9E_1153]
|-
!ITA
|(0280,1144)
|{latin1:1252}
|Italian
|[Q1144_19U-Q19U_1144]
|-
!ITS
|(0500)
|{latin1:1252}
|Swiss Italian
|[Q1148_19U-Q19U_1148]
|-
!JPN
|{0290}
|{Japanese:05026}
|Japanese Katakana
|[Q013_19U-Q19U_037- Japanese_base1996.tbl]
|-
!KOR
|{0833}
|{Korean:00933}
|Korean
|[Q013_19U-Q19U_037- Korean_base1992.tbl]
|-
!MKD
|(1025,1154)
|{Russian:1251}
|Macedonian
|[Q1154_9R-Q9R-1154]
|-
!NLB
|(0500,1148)
|{latin1:1252)
|Belgian Dutch
|[Q1148_19U-Q19U_1148]
|-
!NLD
|(037,1140)
|{latin1:1252}
|Dutch
|[Q037_19U-Q19U_037]
|-
!PLK
|(0870,1153)
|{latin2:1250}
|Polish
|[Q1153_9E-Q9E_1153]
|-
!PTB
|(037)
|{latin1:1252}
|Brazilian Portuguese
|[Q037_19U-Q19U_037]
|-
!PTG
|(037,1140)
|{latin1:1252}
|Portuguese
|[Q037_19U-Q19U_037]
|-
!ROM
|(0870,1153)
|{latin2:1250}
|Romanian
|[Q1153_9E-Q9E_1153]
|-
!RUS
|(1025,1154)
|{Russian:1251}
|Russian
|[Q1154_9R-Q9R_1154]
|-
!SKY
|(0870,1153)
|{latin2:1250}
|Slovakian
|[Q1153_9E-Q9E_1153]
|-
!SLO
|(0870,1153)
|{latin2:1250}
|Slovenian
|[Q1153_9E-Q9E_1153]
|-
!SQI
|(0500)
|{latin1:1252}
|Albanian
|[Q1148_19U-Q19U_1148]
|-
!SRB
|(1025,1154)
|{Russian:1251}
|Serbian Cyrillic
|[Q1154_9R-Q9R-1154]
|-
!SRL
|(0870,1153)
|{latin2:1250}
|Serbian Latin
|[Q1153_9E-Q9E_1153]
|-
!TRK
|(1026,1155)
|{Turkish:1254}
|Turkish
|[Q1155_5T-Q5T_1155]
|-
!THA
|{0838}
|{Thai :874}
|Thai
|[Q838_0T-Q0T_383]
|}


=====Unsupported code pages=====
{| class="wikitable"
!Code
!Codepage
!Nom
|-
!ARA
|0420
|Arabic
|-
!CAT
|0284
|Catalan
|-
!DAN
|0277
|Danish
|-
!FAR
|1097
|Farsi
|-
!FIN
|0278
|Finnish
|-
!HEB
|0424
|None Hebrew
|-
!ISL
|0871 1149
|Icelandic
|-
!NON
|0277
|Norwegian Nynorsk
|-
!NOR
|0277
|Norwegian Bokmal
|-
!SVE
|0278
|Swedish
|}

==Software activation==

After installing the software, you will need to enter activation codes called licence keys. The licence keys are hardware-dependent. To obtain the licence keys for your system, you will need to:

*Retrieve the system id
*Contact Technical Support, or log on to http://server.mappingsuite.com

Note: If the licence keys are not entered, some screens in the Mapping menu cannot be accessed.

===Server ID===

Run the <code>MAPKEY</code> command to retrieve the information needed to generate your licence keys.
 
Write down the information below and then press <kbd>F3</kbd> to exit.

*Serial Number
*Model Number
*Processor Type

[[File:Activ-infos.PNG|600px|none]]

===Entering licence keys===

The number of licence keys required depends on the options purchased.

For each key, run the <code>MAPKEY</code> command and [[OPALE:10.0:Saisie_de_la_clef_logicielle|enter the product number associated with the key]], and then press <kbd>Enter</kbd> to save. 

[[File:Activ1-3.PNG|600px|none]]


Note: If the key you have entered is correct, the next screen is displayed. Otherwise, the key is highlighted as shown below.

[[File:Erroroactivation.PNG|600px|none]]

==Post-Installation checklist==

This section is designed to help you check that the installation process was successful, and that the Mapping environment is configured correctly.

Just follow each step as explained. All checkpoints are listed to ensure that you can use the software as intended.

===Activating the MAPPING user account===

The first thing you want to do is to activate the MAPPING user account on the system.

By default during the installation process, the MAPPING user account is created with a blank password.

Run the <code>CHGUSRPRF</code> command to set a password for the MAPPING user account.

If you do not do that, you will not be able to use this user account for test purposes.

The MAPPING user account has all the permissions needed to use the MAPPING software. It’s an account of type <code>*PGMR</code> that can be used as you see fit, if necessary.

===Checking the MAPPING environment===

On the command line, type <code>MAPPING</code> to open the main menu.

Select option "Mapping Environment Settings" from the Operations menu.

The paths are displayed in the lower end of the screen and the values depend on the system's language. The values may vary with the system on which the software is installed.

===Checking the IFS===

It is also recommended that you check the IFS. The easiest way to do this is to run the WRKLNK command.
In any case, the following folders should be found in the IFS: mapout, mapping, mapreport, mapsend.

===System object required by MAPPING software===

Another thing you might want to do is check the Job Queues and Job Descriptions required for use with Mapping. Run the WRKOBJ command to list MAP* objects required by the software.

The following Job Queues are required:
 MAPQFIND, MAPQMIDDLE, MAPQROBOT, MAPQSLOW, MAPQSMTP, MAPQSMTP2, MAPQSPEED, MAPQTCPIP

The following Job Descriptions are required:
MAPDFIND, MAPDMIDDLE, MAPDROBOT, MAPDSLOW, MAPDSMTP, MAPDSMTP2, MAPDSPEED, MAPDTCPIP

===Starting the Robot===

Run the <code>STRRBT</code> command to start the robot, and then run the <code>WRKSBS</code> command to show the sub-system.