OPALE:10.0:Installation:Installing OPALE Server - Historique des versions

imported>Rdal : /* INSTALLATION STEPS */

2019-03-13T16:31:17Z

‎INSTALLATION STEPS

2019-03-13T16:30:18Z

‎INSTALLATION STEPS

2019-03-13T16:29:16Z

‎TRANSFERRING THE MXXXXX.SAVF FILE TO THE ISERIES

2019-03-13T16:27:59Z

‎AFTER UPDATING

2019-03-13T16:26:54Z

‎INSTALLATION STEPS

2019-03-13T16:26:13Z

‎INSTALLATION STEPS

2019-03-13T16:25:34Z

‎INSTALLATION STEPS

2019-03-13T15:50:09Z

‎STARTING THE ROBOT

2019-03-13T15:49:24Z

‎SYSTEM OBJECTS REQUIRED BY MAPPING SOFTWARE

2019-03-13T15:48:16Z

‎CHECKING THE MAPPING ENVIRONMENT

@@ Ligne 96 : / Ligne 96 : @@
 Note: The code page must always be 4 digits. Example 0037 or 0500.
-After that if you are installing the product, you will need to enter the software activation codes called software keys. If you do not do it now, you can do it later by running the MAPKEY command. See [[OPALE:10.0:Installation:Installing_OPALE_Server#SOFTWARE_ACTIVATION|Software Activation]].
+After that if you are installing the product, you will need to enter the software activation codes called software keys. If you do not do it now, you can do it later by running the <code>MAPKEY</code> command. See [[OPALE:10.0:Installation:Installing_OPALE_Server#SOFTWARE_ACTIVATION|Software Activation]].
 If you are updating the product or do not have the software activation keys now, press <kbd>F3</kbd> to skip.

@@ Ligne 83 : / Ligne 83 : @@
 Enter the name of the library you want to install or update.
-<u>Caution</u>: Whether this is a new install or an upgrade, do not use a production library. Please refer to the Upgrade Process here:
+<u>Caution</u>: Whether this is a new install or an upgrade, do not use a production library. Please refer to the [[OPALE:10.0:Migration:Migration Process|Upgrade Process]]
 [[File:Install0.PNG|700px|none]]

@@ Ligne 57 : / Ligne 57 : @@
 [[File:Cmdftp.PNG|none|700px]]
-Then, skip to '''Restoring the SAVF'''.
+Then, skip to [[OPALE:10.0:Installation:Installing_OPALE_Server#RESTORING_THE_SAVF|Restoring the SAVF]]
 ====SSH TRANSFER TO THE IFS====

← Version précédente		Version du 13 mars 2019 à 16:27
Ligne 108 :		Ligne 108 :

	Note: After installing and before using the product, you will need to end the session and sign back in.		Note: After installing and before using the product, you will need to end the session and sign back in.
−
−	~~===AFTER UPDATING===~~
−
−	~~1. Run non-regression tests~~
−
−	~~2. Activate the MAPPING sub-system:~~
−	~~STRRBT LOG(*YES)~~
−
−	~~3. Checks for any errors:~~
−
−	~~Run this command to see installation messages:~~
−	~~DSPJOBLOG OUTPUT(*PRINT)~~
−
−	~~Other points you might want to check:~~
−	~~Read the DSPJOBLOG at the end of the process.~~
−	~~If you sign off, do a SIGNOFF *LIST to retrieve installation errors or warnings~~
−
−	~~To check for any restore errors (object locked, wrong owner, etc.), run this command in STRSQL:~~
−	~~SELECT * FROM qtemp/RSTMAP400 WHERE RSOSTA = '0'~~
−
−	~~You should have two backups:~~
−	~~The first one in the MAP$$400 library. If there’s a problem, you can rename it to MAP400.~~
−	~~The second one in the MAP$$400SF library contains all SAVFs of all installations on this system.~~
−	~~You can free up disk space by deleting both libraries.~~

	===LANGUAGE===		===LANGUAGE===

@@ Ligne 99 : / Ligne 99 : @@
 After that if you are installing the product, you will need to enter the software activation codes called software keys. If you do not do it now, you can do it later by running the MAPKEY command. See [[OPALE:10.0:Installation:Installing_OPALE_Server#SOFTWARE_ACTIVATION|Software Activation]].
-If you are updating the product or do not have the software activation keys now, press <kbp>F3</kbp> to skip.
+If you are updating the product or do not have the software activation keys now, press <kbd>F3</kbd> to skip.
 [[File:Activ1-2.PNG|700px|none]]

@@ Ligne 97 : / Ligne 97 : @@
 Note: The code page must always be 4 digits. Example 0037 or 0500.
-After that if you are installing the product, you will need to enter the software activation codes called software keys. If you do not do it now, you can do it later by running the MAPKEY command. See Software Activation.
+After that if you are installing the product, you will need to enter the software activation codes called software keys. If you do not do it now, you can do it later by running the MAPKEY command. See [[OPALE:10.0:Installation:Installing_OPALE_Server#SOFTWARE_ACTIVATION|Software Activation]].
 If you are updating the product or do not have the software activation keys now, press F3 to skip.

@@ Ligne 526 : / Ligne 526 : @@
 ===STARTING THE ROBOT===
-Run the STRRBT command to start the robot, and then run the WRKSBS command to show the sub-system.
+Run the <code>STRRBT</code> command to start the robot, and then run the <code>WRKSBS</code> command to show the sub-system.
 [[Category:AS400]]

@@ Ligne 517 : / Ligne 517 : @@
 Another thing you might want to do is check the Job Queues and Job Descriptions required for use with Mapping.
-Run the WRKOBJ command to list MAP* objects.
+Run the <code>WRKOBJ</code> command to list MAP* objects.
-The following Job Queues are required: MAPQFIND, MAPQMIDDLE, MAPQROBOT, MAPQSLOW, MAPQSMTP, MAPQSMTP2, MAPQSPEED, MAPQTCPIP.
+The following Job Queues are required:
-The following Job Descriptions are required: MAPDFIND, MAPDMIDDLE, MAPDROBOT, MAPDSLOW, MAPDSMTP, MAPDSMTP2, MAPDSPEED, MAPDTCPIP.
+The following Job Descriptions are required:
 ===STARTING THE ROBOT===
 Run the STRRBT command to start the robot, and then run the WRKSBS command to show the sub-system.
 [[Category:AS400]]

@@ Ligne 503 : / Ligne 503 : @@
 ===CHECKING THE MAPPING ENVIRONMENT===
-On the command line, type GO MAPPING to open the main menu.
+On the command line, type <code>MAPPING</code> to open the main menu.
-Select option environment settings mapping from Exploitation menu.the paths are displayed in the lower end of the screen and the values depend on the system
+Select option Mapping Environment Settings from the Operations menu.
-language. The values may vary with the system on which the software is installed.
+The paths are displayed in the lower end of the screen and the values depend on the system's language. The values may vary with the system on which the software is installed.
 ===CHECKING THE IFS===