OPALE:10.0:Utilisation:Gestion des codes OMR/en

Managing OMR marks

Introduction

You can compile information in a spooled filed to set up sealing marks using the MAPQUALSPL command on OPALE Server.

Common use: The following example will give you an in depth explanation of the MAPSQALSPL command

There are 14 pages in this spooled file, the first 4 pages are about our client Mr. Dupond, the following 3 pages are about Mr. Durand and the last 7 pages are about Mr. Lemaire. In this example, we will qualify the spooled file using the "Client name" as a sorting key with command MASQUALSPL.

Know that information is added to the spooled file according to the position defined for it in the command (highlighted in yellow here) and that the information added overwrites the existing information if there is any: you will then need to select an empty space on the page.

MAPQUALSPLF (MAPQUALSPL)                                                                                                  
                                                                    

Name of DataBase for sort . . . NAME SORTDB

Line Number . . . . . . . . . . LINE 1

Column Number . . . . . . . . . COL 1

Create spool file . . . . . . . CREATE *YES

Spoolfile Name to Create . . . . SPLFNAME SORTSPLF

Outq . . . . . . . . . . . . . . OUTQ *JOB

Outq Library . . . . . . . . . . OUTQLIB *LIBL

Hold spool file . . . . . . . . RDY *NO

Control sort splfname . . . . . CONTROL N Input spool file length . . . . SIZE 255

Input spool file height . . . . HEIGHT 255

Input spool file overflow . . . OVERFLOW 60

Modulo . . . . . . . . . . . . . MODULO '7'

Sequence modulo . . . . . . . . MODSEQ ' '

Max. quota . . . . . . . . . . . QUOTA '0'

Use duplex . . . . . . . . . . . DUPLEX 'N'

Positions 1 to 6 - Increment of the page number inside the break.

Positions 7 to 12 - Total page number in the break

Position 13 - Break code

• 1: Page "heading" (first)
• 2: Page "next" (middle)
• 3: Page "total" (last)

Positions 14 to 18 - Code of Kern-type sealing

Parity bit: The parity bit changes automatically. It is calculated according to the value the BS4, BS2, BS1 and DGR bits. If the total sum of BS4, BS2, BS1 and DGR is even-numbered, then, the value for the parity bit is 1. Otherwise, when this sum is odd-numbered, the value for the parity bit is 0.

BS4, BS2, BS1: Security bits

Decrement or increment of a binary value for each page.

You can select the coding mode when launching the MAPQUASPL and changing the MODULO parameter according to your need.

Modulo 7

Decrement from value 7 (111 – in binary) to value 1 (001 – in binary)

Modulo 8

Decrement from value 7 (111 – in binary) to value 0 (000 – in binary)

Modulo R

Increment from value 0 (000 – in binary) to value 7 (111 – in binary)

Modulo T

Increment from value 1 (001 – in binary) to value 7 (111 – in binary)

Modulo 4

Decrement from value 4 (11 – in binary) to value 0 (00 – in binary)

Modulo F

Increment from value 1 (0001 – in binary) to value 15 (1111 – in binary)

DGR - Sealing code

Depending on your sealing device, the sealing code for an enveloppe is either placed on the first or last page. The "Insert tag on last page" parameter of the MAPQUALSPL helps you know the position of the closing bit.

If « Insert tag on last page . . . . 'N' » then DGR = 1 on the first page.

If « Insert tag on last page . . . . 'O' » then DGR = 1 on the last page.

Curent break - Total number of breaks (Position 19-24 and 25-30)

When launching command MAPQUALSPL, you can add two pieces of information: the current break and the total number of breaks.

Pour ajouter ces informations, il faut exécuter la commande MAPQUASPL avec le paramètre « Add number of break values . . . » à 'O'.

Positions 31 to 33 – Increment or decrement at each break

Pour encore plus de sécurité, certaines machines de pli utilisent un contrôle à chaque rupture dans le spool.

La commande MAPQUALSPL permet d'ajouter ces informations. Il s’agit du paramètre SEQUENCE MODULO.

Sequence Modulo 7

Les valeurs disponibles pour ce paramètre sont les suivantes : «  », « 7 », « 8 », « R », « 4 », « T ». Elles ont la même signification que pour les bits de sécurité (BS4, BS2, BS1). Merci de vous reporter à la partie BS4, BS2, BS1 : Bits de sécurité, pour connaître la signification de ces valeurs.

Si vous ne souhaitez pas utiliser ces valeurs, vous pouvez laisser le paramètre à blanc.

Important : Ces trois bits sont pris en compte lors du calcul de la parité.